UK Water Hardness Map
Multi-Buy HANDY Packs

FaceLift® Fishscale MICROFIBRE

FaceLift® Fishscale MICROFIBRE

£4.20  -  £327.10  (20)

Unger ErgoTec® NINJA MicroWipe™

Unger ErgoTec® NINJA MicroWipe™

£3.35  -  £44.40  (8)

Claber® 8mm Hose Connector with AQUASTOP

Claber® 8mm Hose Connector with AQUASTOP

£4.80  -  £40.65  (4)

Claber® 8mm Hose Connector

Claber® 8mm Hose Connector

£4.15  -  £35.30  (3)

Angle Neck Adapter

Angle Neck Adapter

£4.15  -  £10.70  (3)

Unger ErgoTec® Safety Scraper

Unger ErgoTec® Safety Scraper

£2.15  -  £25.50  (11)

Unger Stainless Steel S-Channel

Unger Stainless Steel S-Channel

£3.00  -  £30.70  (5)

Pure Water Guides

Choosing a Static RO System

Friday, 16 February 2018  |  Scott


If you’re looking for a static RO/DI purification system, there are a few options with very different capacities (and very different prices). But which one is suited to your business? Do you need a domestic RO/DI System or a top of the range, high capacity system?

Pure water Window Cleaning can be a minefield. Let us give you the low down, so that when you’re looking to pull the trigger, you can make an informed decision!

Not sure what a Reverse Osmosis (RO) System is and if you need one? Then head to our Know The Basics Section.

In the interest of simplicity, the products covered here are separated into a few categories:

  1. Domestic RO/DI Systems – FiltrePlus or Merlin RO
  2. Static Industrial Systems – FaceLift Zero
  3. On-Demand production – HydroPower RO

The systems range from low to high volume output and price respectively. Okay Lets get started!

1. Domestic RO/DI Systems – FilterPlus or Merlin RO

Domestic systems are usually designed to filter drinking water but also have applications in the cleaning industry as low volume water purification units. The Streamline FilterPlus and Merlin RO are the two front runners in this category.

As a first step into water purification these systems can be brilliant, especially as they are fairly low cost and require very little space. There are however a few drawbacks, as you might expect of an entry level system.  Take a look at the two front runners in domestic systems: 

Streamline FilterPlus

The Streamline FilterPlus is one of the favourite systems for one-man-band Window Cleaners. They start at £249.00+VAT and increase in price as the potential pure water output increases.

The 300 & 600 Gallon per Day (GPD) options are very reasonably priced and require very little know-how to setup. They are incredibly easy to run and maintain and the consumable components are inexpensive and easily obtainable (you can do so via our store at

 The major limitation of each is that you are restricted to either 300 or 600 gallons of output per day, making them unsuitable for a growing business needing on-demand pure water in ever increasing quantities. Take into account that whilst these figures sound generous, much like the fuel economy figures of a car, these stats are based on optimum conditions and the real world application will always have figures that vary slightly from this.

Another thing to bear in mind is that If your tap pressure isn’t great and you are not replacing the components regularly, you aren’t going to hit those figures. Also due to the low volume output, producing water isn’t exactly the fastest process so if you have an overly productive day and find you need more water, it’s going to take some time to refill.

You can find the FilterPlus HERE 


Merlin RO

The Merlin RO is capable of a greater output of water than the FilterPlus and also comes with a relatively cheap price at £388.50 +VAT.

It is considered a competitor to the FilterPlus in as much as it is a similar product that has been adapted to the window cleaning industry. The drawbacks of the Merlin RO rest on the fact that it’s an RO system that hasn’t developed over time and remains exactly the same as it did years ago.

Now I’m a firm believer of the saying ‘if it’s not broken, don’t fix it’ – however I don’t think this is the case here. There are a few drawbacks to the system that send up some serious red flags for professional Window Cleaners.

Using the car fuel economy analogy again, to get any serious production from a Merlin RO you need absolute optimum conditions, something not always achievable for window cleaners producing water on their own property. Couple that with the fact that the Merlin RO produces a poor ratio of waste to pure water means you’re going through a lot more waste water to produce 100 Litres of pure than you would with larger capacity systems. This is becoming an increasing problem with more and more households in the U.K now using water meters.

Along a similar line, there is no facility to backwash the system, meaning there is effectively no way to maintain and prolong the life of the membranes – again adding to increased running costs.

This system is a suitable fit for an owner/ operator business where the amount of water needed per day is low and ideally you are situated in a soft water area. It produces more water than the FilterPlus but the inability to flush the membranes and the high waste output make it a costly system to run. Of the two, the FilterPlus seems to be a far more popular low volume RO/DI System.

You can find the Merlin RO HERE 


When Should You Consider a Domestic RO/DI System?

These systems are perfect for one-man-band Window Cleaners not requiring large amounts of pure water, first time water-fed users and those that split their work into both water-fed and traditional cleaning. However for those looking to spend a little more and future proof their business, we’d recommend skipping to the ‘static industrial systems’ section.

When Should You NOT Consider a Domestic RO/DI System?

For those that use large amounts of water daily, or that run multiple vehicles – see the next section. Realistically, the investment in a static industrial RO/DI System is relatively small when considering future proofing your business.


2. Static Industrial RO/DI Systems

Static Industrial systems are effectively just a larger, higher capacity version of the above domestic systems. They work in much the same manor but with large components meaning a greater quantity of pure water can be produced.

As the major consumable parts are larger, generally you can filter more water from each consumable part. That said, the consumable components may produce more water, but are also more expensive to buy so it’s swings and roundabouts on that account. The FaceLift Zero range of static systems are a great example of this style of system.

FaceLift Zero

The Zero systems come with a little more customisability with 20’’, 40’’ and twin 40’’ membrane options. They can also come with the option of a fitted booster pump to increase water production further. They start at £670 + VAT which means great value for money, given the high capacity of the system. The only thing to note is that they are a larger unit and so they take up more space to store. 

There is also an optional upgrade of an auto shut off (Solenoid & float valve). This is to stop your tank overflowing without having to sit for hours overseeing it. There is also an optional inline TDS Meter so you can fully understand how the different components of the system are working.

When Should You Consider a Static Industrial RO/DI System?

This system is perfect for growing businesses looking to purify enough water for multiple operators or for one large capacity van system.  Quite often multi-vehicle businesses will use a system such as the FaceLift Zero to fill a communal storage tank, where the vehicles are then filled with pure water each morning and sent out to work.

When Should You NOT Consider a Static Industrial RO/DI System?

This system is not suitable if you do not have sufficient space to store the filtration unit and a water storage tank. Those limited with outdoor space would not be able to use this style of system. Ideally a small garage or insulated shed would suffice.

You can find the FaceLift Zero HERE 


3. On-Demand Production

Reliably producing thousands of litres of water each day requires an RO system with an exceptional capacity. When talking about this type of system there is really only one worth discussing and that is the HydroPower RO from Unger.

HydroPower RO 

Unger’s Window Cleaning tools are potentially the most popular on the market and so you continue to produce excellent traditional and water fed window cleaning kit year after year. The HydroPower RO is the result of years of work and is perhaps the only system on the market designed to specifically solve all the problems of the modern pure water window cleaning business.

The HydroPower RO can produce up to 400 litres an hour but more than that, it comes with a full digital display showing you the performance of filter and membranes and automatically maintains itself, prolonging the life of the consumable components. So far the HydroPower RO has been used successfully as a static RO/DI system, as an on-site commercial cleaning solution and even a portable window cleaning system running up to 3 operators at any one time.

Unlike the other systems mentioned so far, the HydroPower RO is capable of creating enough water for 3 operators to work on-demand. Meaning no down time waiting for water to purify and can be used on site without any need for a storage tank if necessary.  Because of this, it is capable of being used as a high output static system or as a portable solution.


When Should You Consider an On-Demand Filtration Unit?

The HydroPower RO is perfect for larger Window Cleaning businesses as a multi-purpose filtration and delivery system. For use as a static system, it can purify water for multiple vehicles from a communal storage tank and continually maintain itself. Alternatively it can be used as a portable solution for on-demand filtration and delivery on larger commercial cleaning sites. Because of the exceptional output, it has even been used as a pure water filling station for multiple businesses!

When Should You NOT Consider an On-Demand Filtration Unit?

The HydroPower RO is not suited to single operator/ vehicle businesses, it would not be used to its full potential and so a static industrial RO/DI (see number 2) would be the recommended unit.

You can take a look at a write up we did of the HydroPower RO HERE.

So there we have it, the three primary types of static RO/DI - drop us a line or give us a call if you'd like any more information

01446 749 060 

Facebook: WindowCleaningWarehouse

5 Products That Will Change The Way You Work

Monday, 31 October 2016  |  Scott

Window cleaning is an industry rife with the ‘next best’ product that will ‘revolutionise’ how you work.  From the great to the downright stupid, there is an unending list of tools and accessories aimed at improving how you work on a day to day basis.

The Team here at WCW has come up with a list of 5 of our favourite tried and tested tools and upgrades that we couldn’t be without. No gimmicks or fads, just proven products that windies every day couldn’t be without.

So, in no particular order, here is the 5 products window cleaners shouldn’t be without:

The UNI-VALVE from Exceed Innovations has been a big seller since its inception and is widely regarded as the most convenient way to control water usage on water fed poles. The UNI-VALVE is a small item fitted on pole-hose that allows you to switch off the flow of water by simply tugging the pole hose coming from the bottom of the pole.

 Its simplicity and the fact it fits on the inside of the pole means it rarely goes wrong and isn’t likely to be damaged in the same way some of the competing products do. Not only that, it is relatively inexpensive given the money it will save you daily on water and sheer convenience. The univalve is a staple for many window cleaners and certainly one of the first things to spring to mind when creating this list.

You Can Purchase the UNI-VALVE HERE 

2. PowerUp! HD
The PowerUp! HD from Waterworks is another popular item, one that most windies will be familiar with, but it definitely deserves its spot on our list. The PowerUp! HD is the first window cleaning specific electric reel and is designed from the ground up to meet the needs of our industry.

 For those of you that aren’t familiar, the PowerUp! HD is a device designed to relieve the task of winding in your hose reel. Boasting a reel in time of 100m in 30 seconds it certainly does save time (and your shoulders!).  If you’re reeling in your hose reel a number of times a day, it can really be an effective tool. On top of that, Waterworks are a reputable company and have excellent aftercare service so you can rest assured the PowerUp! HD is a great purchase from a great company.

You Can Purchase the PowerUp! HD HERE 

3. FaceLift® PhoeniX FLITE Connector  
The PhoeniX FLITE Connector from FaceLift® uses a custom designed pole insert with integrated quick release connectors to give you a ‘tubeless’ water fed pole.

The PhoeniX FLITE Connector allows you to store and use your pole without any unnecessary hose or dangling attachments and fittings.
What this effectively means is:

  • Prolonged Life of Your Fittings
  • No Mess or Tangled Hose When Stored - The Tidiest Your Van Will Ever Be!
  • One Hose Kit per Reel - Compatible with all PhoeniX Poles up to 50ft
  • Fast & Simple Detachment of Pole Hose - No Snags, No Fuss

You Can Purchase the FaceLift® PhoeniX FLITE Connector HERE 

4. VISION V2 Pure Water Additive
VISION V2 from Jigsaw Innovations is an absolute must for many window cleaners. At WCW we get great reviews of VISION V2 on a regular basis with one customer leaving the comments below for us in September:

‘Have been using for a couple of months now, the first thing I noticed is the brush seems to glide with less resistance. The most notable change is the shine of the glass and frames, giving great kerb appeal!’

VISION V2 is a cleaning formula that has been designed to be added to purified water primarily for use along with water fed pole window cleaning.

VISION V2 gives purified water that added power that is sometimes needed. When added, it cleans better than pure water alone, leaves a great shine, and helps the brush head glide along the glass which can speed up your working day. Another benefit is that a lot of windows become hydrophilic (having a strong affinity for water) so the final rinse is easier. Some users have even experienced being able to work significantly faster than when using pure water alone.

You Can Purchase VISION V2 Pure Water Additive HERE

UNDERPORTS aren’t necessarily the most flash product on the market but the peace of mind you’ll get from using your system whilst the van is locked make them  a must have.

Working on site with your van doors wide open when you are anywhere up to 100 meters away gives nobody any peace of mind. Fitting UNDERPORTS gives you a low cost resolution to this problem. They allow you to fill or use your water fed system with the van completely locked.

UNDERPORTS use secure screws to attached to the van bumper and require a small hole in the van floor to allow the hose to pass through. The port usually sits high enough to give enough clearance for speed bumps etc and is fitted with nickel coated brass fittings to ensure they withstand being outdoors for their entire working life.

You Can Purchase UNDERPORTS by Giving Us a Call on 01446 749 060

Are there any other products that you think are an absolute must have?
Let us know on our Facebook page HERE 

6 Common Questions About Window Cleaning Insurance

Thursday, 29 September 2016  |  Scott


Window Cleaning insurance seems to be an area where clear cut answers are a rarity. With this in mind we spent some time chatting with Jason Gibson of BeSure™ Insurance and found answers to 6 common questions.

Does every window cleaner need public liability insurance?
Having public liability is not a legal requirement but in the event of you causing damage to a property or an individual whilst working, it would outweigh the cost for this cover.

Do I need employer liability insurance if I have no staff but use subcontractors?
You would only require E/L if the subcontractors are labour only. If they are Bonafide, then cover is not required as they should have their own cover in force.

Does every policy cover me for damage to a customer property?
No.  Most Public liability policies exclude cover to damage to property being worked on.  However here at BeSure™ we have negotiated with certain insurers to provide this cover at no extra cost.

Will I save money on vehicle insurance using a fleet policy if I have only 2 vans?
Saving money with a fleet insurance is depending on a number of variables. But there are a number of benefits for choosing a fleet policy if you own more than 1 van.

  • Only 1 renewal date to remember
  • If a claim is made the process can run smoother and more efficiently
  • If you add another vehicle mid-term then that vehicle is automatically given the same level of discount
  • Open driving dependant on the actual driving restriction you choose. (Any driver over 25 could drive with your permission, subject to being claim and conviction free)

Do I need to change my policy if I am hiring out an access platform for just one day?
If you’re hiring the platform then we can make a mid-term adjustment to your policy and a charge may apply for this to be covered.

Does my van insurance cover the system as goods in transit or is it classed as a modification?
The water fed system that would be fitted to your vehicle would be classed as a modification and therefore is not covered as standard with some providers. However here at BeSure™ we have negotiated with certain insurance companies and we can offer Theft cover for the equipment from the vehicle.

*Insurance Policy Photo CC: Full Coverage Insurance

Page 1 of 2    (5 Articles)